FPV1664

Last seen: Jun 18, 12:08

Followers

Following

Upvotes

Posts

I have 1 drone: the dji neo (But that doesn't count :D). I design FPV-Frames with CAD and I really like building rc stuff. Msg me for CAD Part/Frame suggestions - I would also like feedback ;)

Activity feed

June 13, 2026 at 3:56 PM

Commented on

bernar_ghost's

post

@bernar_ghost I dont think there's a better way, especially because its your first build. You can also find it as pano x or pano x4 btw. I already tried to make a cad model... It was a pain to find the electronics and it was an even bigger pain to design a frame, that's 23mm high 😂

June 13, 2026 at 1:38 PM

Commented on

bernar_ghost's

post

Yes, I think you should go with that one 👍

June 13, 2026 at 10:56 AM

Commented on

bernar_ghost's

post

@bernar_ghost The big problem is, that the osmo 360 is so flat (23mm without lense) so the drone has to be just 23mm high.

June 13, 2026 at 10:23 AM

Commented on

bernar_ghost's

post

I can try to design a Frame, but this will take long... The drone will be pretty complex, so maybe you make a small FPV build, so that you know the basics of building and wont be a big pain for you to assemble :)

June 10, 2026 at 12:15 PM

Commented on

Ac23's

post

From emax i found 5 RTF Kits (from cheap to expensive):

-Emax Tinyhawk Lite RTF FPV Racing Drone 75mm 0806 Motor Runcam Nano 3 | Emax

-Tinyhawk Lite Adventure - RTF - Ready To Fly Kit | Emax

-Emax Tinyhawk Nanoscout 65mm 08015 22000KV 4in1 6A ELRS RX FPV Racing | Emax

-Emax Tinyhawk III RTF Kit FPV Racing Drone F4 5A 15000KV RunCam Nano 4 | Emax

-EMAX Tinyhawk III Plus Freestyle FPV Racing Drone RTF & BNF Analog ver | Emax

I hope this helps!

(What Blaqkstar recommended is probably the best choise)

June 10, 2026 at 11:53 AM

Commented on

bernar_ghost's

post

Do you just want to put a camera on a normal frame (so the drone is on the footage), or a custom frame where nothing is in the way of the 360° camera?

June 8, 2026 at 2:45 PM

Left a review on product Gens Ace 2200mAh 3s 25-50c Lipo Battery Pack XT60

Very good

Super quality. Durable. Perfect for fixed wings.

June 8, 2026 at 2:44 PM

Left a review on product Tattu 1800mAh 3S 75C Lipo Battery Pack With XT60 Plug

Really good

Really good LiPo. Super quality, perfect for fixed wings.

June 8, 2026 at 2:43 PM

Left a review on product FlySky FS-iA6B Receiver 6CH 2.4G AFHDS 2A Telemetry Receiver - Black

Good Receiver

Good quality, survived many crashes. Better suitable for fixed wings than for drones.

June 8, 2026 at 2:41 PM

Left a review on product Flysky FS-i6X 10CH 2.4GHz AFHDS RC Transmitter w- X6B Receiver

First Radio, good choise

Very good remote (my first one). Really good quality. Isn't bad, that it doesn't have EdgeTX/OpenTX.

June 7, 2026 at 3:13 PM

Created a post

If someone wants a custom cad part message me (it helps me improving my skills and with it I help others). I design any parts you want.

June 7, 2026 at 1:55 PM

Commented on

M4R5_FPV's

post

The Speedybee tx800 is a solid vtx :)

June 7, 2026 at 1:48 PM

Commented on

BlaqkstarFPV's

post

@BlaqkstarFPV I personally use a bat safe. It's worth the money (and probably safer than anything else)!

June 6, 2026 at 9:18 AM

Commented on

FPV1664's

post

I already have a remote and a receiver so I would use the PNP Version for 120$ (~100€): Emax Babyhawk II - 3.5" Micro FPV Drone TBS UNIFY PRO32 NANO 5G8 V1.1 | Emax

June 5, 2026 at 3:41 PM

Created a post

Hello! Is the Emax Babyhawk 2 (analog) a good beginner quad? It's pretty cheap (about 100€) seems to good to be true... Does anyone have some experience with the Babyhawk 2?

June 4, 2026 at 12:09 PM

Commented on

AaEnnDeeErrEeEss'

post

You could use PCBway (heard that they're a pretty good service).

May 20, 2026 at 12:57 PM

Created a post

Hello again! This time a 3 inch frame! I linked all the Parts, that I would put on this frame. If someone prints it please give me feedback!

https://www.thingiverse.com/thing:7333549

Have fun printing!

May 20, 2026 at 12:43 PM

Created a post